front bump stops question

Steve, I have one car with comp engineering front shocks that I removed them on, and it helped a ton. however, I was not able to completely remove them on my new car because without a little bit of a stop it allowed the lower control arm to pull my QA1 shocks down far enough that the side of them would hit the frame where the lower arm bump stop makes contact on compression.

so I had to trim them down as far as I could without the shock body being damaged. the QA1 shocks have a larger diameter body than the CE ones. may want to check for that issue if you do trim or remove the stops.

just keep that in mind.