Clutch master for 6spds

I pretty much copied 72BBSwinger's setup. You can find it in the 4 speed thread I believe. 7/8" master placed in the lower rearward hole of the factory pedal once you drill out the spot welds that hold the arm to the pedal. Hopefully you'll see what I mean when you look at the pedal, but basically there's a piece spot welded on in four places that connects to the factory linkage. I used one of the spot weld locations (rear lower when installed in car) as my pickup point for the master. Gives a pretty straight throw and nice pedal feel for me at least. Mine took a fair amount of stroke to get dialed in, but nothing too hard to figure out.