How to assemble my end links?

Thanks guys for the feedback. I should have mentioned that the torsion bars aren't in the car yet and it's still on jackstands so I can't use the weight of the car to my advantage right now. I was hoping to get it all together while it's still easy to get at up on the jackstands.

In the picture, I just put the end link together with a bit of tension to see if the upper bushings might crush in to the LCA tab a bit. The sway bar is just hanging underneath it all. Right now, the shape of the bushings don't really fit the LCA tab or the sway bar, so it's all spread out past the length of the bolt..

I think Momoparman hit it on the head - after I put the torsion bars back in, I'll stick the bolt up through the sway bar first then lift the whole works up with the jack and get the nut on from above the LCA tab.

I figured it would be something simple just hadn't thought of "turn it upside down" duh..

Cheers,