Taurus fan on Champion radiator

Good morning everyone,

A few years back i installed a 3-core champion radiator for my 340. Since the old design did not allow use of the original fan shrough and fan i installed a generic 16" electric fan with no shroud. Overall that worked fine and would run at just over 190 when it was in the 90's.

I picked up a fan/shroud from a 93' Taurus to further improve this setup and so far its turning out nice. After the perimeter tabs are cut off and a little trimming the shroud fits perfect on the radiator. Still in progress so i will add pictures of the clearance to the water pump pully soon.

Here is what it looks like so far...