Grant horn button help!

The billet adapter will need the 3 bolts threaded into the splined hub now and a flat washer placed over the end of the steering shaft.

View attachment IMG_1147.jpg

Followed by the nut.

View attachment IMG_1148.jpg

I hadn't tightened any of those fasteners up yet. Now is when I attach the short pigtail wire to the billet adapter which should be grounded to the steering shaft. This wire did not come with the kit.

View attachment IMG_1149.jpg

Time for the steering wheel.

View attachment IMG_1150.jpg

Naturally the wires will stick through.

View attachment IMG_1151.jpg

I put one allen bolt in to hold the wheel in place while I attached the wires to my horn button.

View attachment IMG_1152.jpg

Then it's just a matter of taking that first allen bolt out, lining up the holes, and running the 5 allens back in.

View attachment IMG_1153.jpg