Lokar Parts List

You might be able to save a few bucks with the Duo-Pack that has the throttle cable and throttle bracket and return springs in one kit?
http://www.summitracing.com/parts/lok-dp-1000ht

If you have not used one before, they are nice setup, but pretty generic (not really much that would make them brand specific.) The throttle cable end and bracket that connect the the carb would be the same for any car. The throttle pedal end has an aluminum connector for different throttle pedal setups, for use on the Mopar, you just pull the inner cable out to remove the adaptor, and there is the ball on the end of the cable that you need. Slide the cable back in the outer cover, and connect the carb end connector (has a set screw to hold the cable.) If you get a cable that is too long, it is easy to cut to a shorter length, just make sure you to remove the inner cable before cutting the outer cover. I had to shorten the outer cover on my kickdown because the inner cable did not have the length for full kickdown travel.

The cables are also avaliable in black if you prefer that color, but cost a bit more.