It's a raised deck 496". K-1 4.150"/2.2" crank, Scat 6.8"/2.2" rods. Diamond custom blower slugs. Edelbrock RPM heads flowing around 300cfm @ .600 with PAC springs, Comp tool steel retainers, Manton Pushrods, T&D rockers. Bullet custom grind solid roller & Crane lifters. M-1 single plane intake and a 750cfm blow through carb from CSU.
The Procharger is just a little D1SC with a 7.6" lower & 4.25" upper. Hoping to get the boost down to 5-6psi with that pulley configuration. It's just a little pump gas street car, not an all out effort by any means.