Professional Products Crosswind Intake Manifold

Ha, yeah. It's view was blocked by the alternator wires. I started blowing smoke into the pcv port in the front of my edelbrock and found the vacuum port pretty quickly. Still have a vacuum leak or some other issue but I ran out of light. It's been 100+ degrees during the day and not much cooler at night so I'm limited on when I work on it.

I'll try to find some time to put a vacuum guage it tomorrow. Sounds like it's missing all over the place. I think it's vacuum right now because I can screw the air mixture screws all the way without any change in the idle. I have the idle and fast idle screws backed all the way out and the choke it pulled.

Thanks again
Joel