68 GT convertible project
We are going to do the same thing. Once the car is off the rotisserie, we will reinforce that area. I don't want it cracking out again. Thanks for the picture.
It looks like we are going to replace more metal. The trunk drop offs have some pin holes in them. They aren't very expensive so we will be ahead in the long run if we replace them. Same thing for the front fenders. The lower patches are expensive. It will be cheaper to replace the fenders than to fill all the trim holes, install patches and straighten them out. Hopefully I can find all that stuff at the Nats in three weeks. Here are the updated pics.
Lead cleaned out of the quarter to rocker joint.
Bad spot cut out.
Someone butchered the firewall above the bulkhead connector. Here is the patch that will fix the area.
Tacked in place.
The car is on the rotisserie.
We are going to do the same thing. Once the car is off the rotisserie, we will reinforce that area. I don't want it cracking out again. Thanks for the picture.
It looks like we are going to replace more metal. The trunk drop offs have some pin holes in them. They aren't very expensive so we will be ahead in the long run if we replace them. Same thing for the front fenders. The lower patches are expensive. It will be cheaper to replace the fenders than to fill all the trim holes, install patches and straighten them out. Hopefully I can find all that stuff at the Nats in three weeks. Here are the updated pics.
Lead cleaned out of the quarter to rocker joint.
Bad spot cut out.
Someone butchered the firewall above the bulkhead connector. Here is the patch that will fix the area.
Tacked in place.
The car is on the rotisserie.