'68 Barracuda Notch

good luck with the tail lights
repo in new condition big big $


I recently posted a thread asking for opinions on this car I found on Craigslist. I got some great advice from you guys and finally decided to take the three hour drive to check it out.













After a test drive, some examination, discussions and price negotiating, I brought it home Saturday evening.

It's a '68 with some '67 parts. The previous owner gave me the following engine info: 360 engine bore .30, ( less than 2000 miles on engine), Holly 4bbl, 480/280 comp cams, KB 107 pistons.

I highly doubt the less than 2000 miles statement. The oil was black and needed changing. One of the lifters developed a tick on the way home. Marvel mystery oil to the rescue.

It has disc brakes up front, but the rotors need turning. Anything associated with the heater doesn't work. The factory oil pressure gauge doesn't work, but an after market gauge has been added. Most of the dash lights work. All the glass is in good shape and the trim is pretty good.

The seat covers look brand new and the carpet is in good shape. There is a little bit of rot on the rockers, but I think it can be patched. The floor pans have been patched before in some spots. I found a couple small holes, but nothing major (at least not yet). The trunk pan is solid, but needs a couple small holes filled as well.

The car sits way too low in the front and the wheels have impacted the fenders before, so while they look no worse than the rest of the car, they will need to be replaced whenever I end up painting the car. One of the down tubes on the driver side header has taken quite a beating because of the height, so that will need to be addressed as well.

I know fully well that I have bought a basket case of a car, but its my basket case now and I can't wait to start working on it. I certainly could have saved some money in the long run buying a much nicer car to start with, but half the fun is working on them.

My immediate goal is to get the car running well and make sure everything is functioning properly. Then I can begin to address cosmetics.

It certainly is a head turner. I've had multiple people stop me to talk about it and got thumbs ups from drivers on the way home. This thread will be as much for me to chronicle my progress, but I'm looking forward to the journey.

Now to find some '68 tail lights....