**73 Scamp Mini Pro-Street Engine Swap**

9" is all tacked together. The Ladder Bars should be here in a couple days. I will tackle them when they get here and then finish TIG Weld it all off.

I got my axle measurements and I will be placing the order tomorrow. Going with Moser 35 spline & 5/8 ARP 3" Studs & Lug Nut Hardware.

I like to tack the housing ends in place and then get all the hardware on the housing and then TIG Weld it all off except the housing ends. After It is all welded off, brackets etc, then I cut the ends loose to make sure the axle hardware is straight, then tack them back on and weld them off. Tig welding makes stuff move around a bit, **** gets HOT!

There is that missing Piece!!

View attachment php09QrGtPM.jpg

View attachment phpnEFohZPM.jpg

View attachment phpdOyubkPM.jpg

View attachment phpcL7iafPM.jpg

View attachment php9cFxd1PM.jpg