Slant 6 Turbo 68Dart Project

Okay, another $200 spent. $50 soon to come on some more stuff, but I just got me the final exhaust pieces for the exhaust minus the tubing for the downpipe, which I'm hoping an exhaust shop will maybe have and be able to fab up. I'm doing this in such a way that the exit on the turbo will be shot straight back, then down near the stock exhaust location and hopefully mount up before the cutout. The U bend I got has 6" legs on each side, and a 12" diameter, which should space the turbo away in a couple different options depending on where I cut it.

02 Sensor bung and plug: $5.00
U Bend exhaust tube in 2": $20.00
Thick Exhaust flange to mount to manifold: $4.00
28 x 7 intercooler and different 2 1/2" pipe bends: $140
Aluminum pieces to assemble carb hat solution: $25

Thinking this may shoot over $1k, with the addition of what's going to amount to $250 worth of fuel delivery equipment... but... wishful thinking right?