Slant 6 Turbo 68Dart Project

so looking at the pics it might work. you would have to make sure you are maintaining at least a 45* angle from the bottom of the turbo for the oil drain. you might need to scrap the u pipe you have and get one with a much tighter radius. find the thickest one you can in the tightest radius and you should be good to go. cut it to size and weld on the flanges. should be pretty simple. as for leaving it hanging off the manifolds, i dont think that is such a good idea. you can make some kinda bracket to support the weight of the turbo off of the motor mount. or even the motor mount and the transmission to engine support.