Model parts...
So guys,
Here ya go...
426 DOHC Hemi Head, showing valves, and deep sump oil pan to the same engine!
426 Hemi Valve covers, saying or raised lettering to say "Mopar HEMI" with the penastar in front of "Mopar" The chrome one, is the master copy, mine is well, the resin copy! Included is the head for said valve cover,. THESE are currently in this picture NOT cleaned from "Demolding"
Seen here is the chrome master copy as well as a set (enough for 2 engines) of the Small Block "LA" Mopar engines.....
These are the mold completed in storage parts so far. Seen here is 2 different types of Slant 6 blocks, a single type Small Block "LA" Mopar engine, Assortment of Hemi Heads AND Valve Covers, and oil pans for all of the above! Timing chain covers for the slant 6's also done and being made, I've got a TON yet to make, BUT the parts are coming, it takes a couple days for the molds to cure to be of use AFTER 36 hours....
Of course at this rate, ALL are 1/25th scale...I've got some 1/16th scale plans for engines as well, BUT thats down the road.
Something I want EVERYONE to remember.....I am doing this out of fun and being so, the work takes a bit of time to make/create the master copy, I do have some limitations on making my own molds and pouring them from resin plastic. HOWEVER if I can come up with at least one flat side on any one object, I can mold it, and nothing over 4 inches long by 4 inches wide....The small parts, are done in a cooking sort of way! As you may see in future pictures!
Now as I'm sure all have read of me, I owned one time a Hobby Shop, I'm now enjoying all of those fruits of my labor from the very beginning, when I started....Because I no longer have the "shop" ALL that I owned is at my house, and I do this at home as well....YES, I've got one hell of a mess, if you only knew, but.....ITS FUN or I wouldn't be doing it. SO, as time passes, please, hang in there, things will happen as I am able!
Thanks for the interest everyone! ENJOY!
So guys,
Here ya go...
426 DOHC Hemi Head, showing valves, and deep sump oil pan to the same engine!
426 Hemi Valve covers, saying or raised lettering to say "Mopar HEMI" with the penastar in front of "Mopar" The chrome one, is the master copy, mine is well, the resin copy! Included is the head for said valve cover,. THESE are currently in this picture NOT cleaned from "Demolding"
Seen here is the chrome master copy as well as a set (enough for 2 engines) of the Small Block "LA" Mopar engines.....
These are the mold completed in storage parts so far. Seen here is 2 different types of Slant 6 blocks, a single type Small Block "LA" Mopar engine, Assortment of Hemi Heads AND Valve Covers, and oil pans for all of the above! Timing chain covers for the slant 6's also done and being made, I've got a TON yet to make, BUT the parts are coming, it takes a couple days for the molds to cure to be of use AFTER 36 hours....
Of course at this rate, ALL are 1/25th scale...I've got some 1/16th scale plans for engines as well, BUT thats down the road.
Something I want EVERYONE to remember.....I am doing this out of fun and being so, the work takes a bit of time to make/create the master copy, I do have some limitations on making my own molds and pouring them from resin plastic. HOWEVER if I can come up with at least one flat side on any one object, I can mold it, and nothing over 4 inches long by 4 inches wide....The small parts, are done in a cooking sort of way! As you may see in future pictures!
Now as I'm sure all have read of me, I owned one time a Hobby Shop, I'm now enjoying all of those fruits of my labor from the very beginning, when I started....Because I no longer have the "shop" ALL that I owned is at my house, and I do this at home as well....YES, I've got one hell of a mess, if you only knew, but.....ITS FUN or I wouldn't be doing it. SO, as time passes, please, hang in there, things will happen as I am able!
Thanks for the interest everyone! ENJOY!
