Stalling Out

I did as recommended. I found out to get the car running really good on the first try, all I have to do is pump the gas really lightly so the choke clicks shut, then I turn the key and vroom! the engine idles at high rpm and then kicks down pretty low. When I put it in reverse the engine idles a bit and dies. This is all from a COLD start. HOT start the engine idles fine very low rpms, with no problem with idle in reverse.

Idle in reverse or drive, from a cold start, and the car stalls out. Drive the car a little bit and get the engine going and im fine.

I hear a squeaking noise from under the hood. I just replaced the intake manifold, and rubber valve cover gasket. The PCV valve can be manipulated easily, as well as the breather element, both are able to wobble around, and the PCV grommet has a little oil on it. Could these be a vacuum leak and the source of a squeak/bad idle?

Thanks.