It took you long enough.........

This is a 48 degree tall deck / wet sump motor.
W-9's done by Brian at R&R , a local who does very nice work.
Porting was done with mid lift in mind and is not a balls out deal.
349 cfm @ .600 lift on the intake , 250 on the exhaust.
BRC billet crank , Crower rods , 4.125 X 3.79 , Bullet cam and Crane ultra pro rockers , 1.6.
Stick is 260 & 268 degrees @ .050 , lift is .668 lift on both.
12.85:1 with JE pistons , Stef's pan and accusump , home made headers - 1 7/8" X 35 " primaries with 3 1/2 " collectors.
It is corn fed , with an 850 by Quickfuel
Low 1st gear 904 , 4800 vert by Ultimate , 3.91's and spool in a braced 8 3/4. 742 case and billet cap. hung on SS leafs moved into the rails. 295 - 55 / 15 Mickeys , full cage , AlterKtion front end.
I think there is probably more , but I have been picking on it for so long that I forget what I did that long ago. :D