Anybody running 17" Cobra Bullit rims on a Duster

Has anybody run into this problem? Just purchased some American Muscle rims (polished bullits) 17 x 8 with 245 45 17 tires.The rears are fine 1/4 "spacer on the drivers side to clear the spring,the problem is the front.The hub on the rotor extends out 1 1/2 inches but the depth of the bore register in the rim is only 1 inch.If you were to bore out the rim you would loose the cap register area.Even with a 1/2 spacer the cap won't seat properly on the rim.I know I could run a 5/8 or 3/4 spacer (with long studs) but am concerned the tire will be extremely close to the wheel lip opening on the front fender.The rims have 5.72 backspace. Anybody have experience with these rims???????