Rapom's Rocket - just another Duster build thread
Sorry for the crappy phone pictures, I forgot I was going to do this.
It's a Summit oil filter relocation kit, just the single filter kit. I used a Canton racing oil filter plate, and replaced the 1/2" rubber hose that came with the kit with -10 AN stainless braided hose and -10 AN fittings from Summit.
Finding a spot for it was a little challenging with the J bars. I didn't want to run it all the way up front and have a ton of hose, but I also had to make sure I had enough room to get at the fittings and still be able to remove the filter. Plus the -10 AN hose doesn't make very tight turns, which I suppose is good for flow, but it takes some mounting locations off the table too.
Oil filter relocation kit
http://www.summitracing.com/parts/sum-g4985-1
Canton oil filter plate (eliminates the stock paper gasket and improves flow)
http://www.summitracing.com/parts/ctr-22-575m
Sorry for the crappy phone pictures, I forgot I was going to do this.
It's a Summit oil filter relocation kit, just the single filter kit. I used a Canton racing oil filter plate, and replaced the 1/2" rubber hose that came with the kit with -10 AN stainless braided hose and -10 AN fittings from Summit.
Finding a spot for it was a little challenging with the J bars. I didn't want to run it all the way up front and have a ton of hose, but I also had to make sure I had enough room to get at the fittings and still be able to remove the filter. Plus the -10 AN hose doesn't make very tight turns, which I suppose is good for flow, but it takes some mounting locations off the table too.
Oil filter relocation kit
http://www.summitracing.com/parts/sum-g4985-1
Canton oil filter plate (eliminates the stock paper gasket and improves flow)
http://www.summitracing.com/parts/ctr-22-575m