DO NOT BUY! Magnum Farce 2" drop spindles are junk
based on the big ball joint 1973-up design and utilize the stock brake calipers and rotors
Same spindles same problem.
Problem is that nobody has a hub that provides the correct offset for the conversion.
I am bringing my hub to a buddy who has a machine shop and I am going to try to correct the issue. Its only 2 dimensions that are off.
A and N
http://www.wilwood.com/Hubs/HubProd.aspx?itemno=270-8775
A should be 1.156 and N should be 1.56. Simple change but neither company wants to talk about it. I realize that this may not work for all wheels but folks who use typical 5 spoke 17" plus wheels will benefit.