Slant 6 Turbo 68Dart Project

.32 is good. im actually thinking about opening mine up. pretty sure my setup can handle more timing. that and im looking for some more power.

crank that screw in. the difference between holding pressure and flooding is only 1-2psi. carbs are picky like that.

clockwise retards timing.


i just made one of the brpv's you were thinking about. the one with the nickle. still gotta put some threads on the shaft but it seems like it will work. gonna try an alternative to the jb weld and nickle for the block off. the hardest thing was getting the seat just right for the valve to seal. took two power valves to figure it out.