Slant 6 Turbo 68Dart Project

sorry to hear about your sammich. good thing you caught it before it drained the motor. you are either really observant or really lucky. most people wouldnt have caught it, myself included. the fittings will work though. did you wrap them in teflon tape when you put it all together? i used the yellow stuff for gas and oil when i did mine but the regular white should also work.

did you do anything to the carb when you put it on? i would check the float level and go from there given your up and down hill observations. also the idle mix screws. do you have a tach? what does it idle at? figuring out the afr gauge will help tons as far as figuring out what is going on. have you tried adjusting the wastegate? does the boost gauge read anything when you get on it? do you have a gasket from the carb hat to the carb? fwiw my car at 5psi didnt really make any noise or do much from the bov. i could feel it when i put my hand in front of the port and revved it though, it should blow when you let off the gas. welcome to the fun part of the build, tuning.