More exhaust manifolds

Gil,
I have a AT on the floor, no power steering(arm-strong), the motor is actually from an 81 Chrysler Cordoba, Original motor was removed before I purchased the car. All original on the motor mounts, I just replaced them. No mods desired, want her to be a parade car, just a weekend driver type of ride. Not looking for creating a race car. Original K frame is in good condition. What type of mods were you thinking I need for steering? My trans is the original one A-904. Cable shift through the center console hump. Brand new heads for the 81 motor, I am just concerned about the steering column clearance. It is snug but I don't see any issues if the manifold is a 360, same block size. I am going to see the guy I gave the originals too. I want to get some specs off of them if he doesn't want to let me have them back. I don't like to give something and ask for them. I will get casting part numbers for reference. I believe 2 1/4 outlet, I can verify what is under the car as well. :) Thank you very much for the quick response. Suspension is stock as well. Again, thanks v/r Al