How to remove 1968 Barracuda Dash assembly?

Windshield has to come out. After you take out the windshield there will be 5 small bolts under the window rubber at the cowl that need to come off. You will also need to drop the steering column or at least unbolt it so it can move around. There are 4 bolts at the firewall and 2 right about at your knees if you are sitting in the seat. Then there are 2 bolts just above the kick panel on both sides. Loosen those and use them for a pivot point. Roll the dash back and it will come out. You can remove the cluster, unplug wiring, heater hoses and cables for the heat air after you roll the dash back on the pivot points.

Pretty sure I have pictures of the procedure in by build thread below>>>>