340/mag360 exhaust manifolds

I forgot to mention that I'm also starting to sell the swedged/flared down pipe and down pipe flange for both the 360 manifold/Dakota and the 340 manifold. I've had some members ask for these because they either want to build their own exhaust or they have no muffler shop nearby or the muffler shop can't make the proper swedge/flare. So here are the pics of what I sell so you can make your own exhaust. I use 2 1/4" pipe and a factory type flange for the 360 with an aftermarket flange for the 340. The 340 required a "flat flare" and the 360/Dakota requires a factory type "bell flare". I sell them for $30 per side and you get the 2 1/4" pipe stub, properly flared with the correct flange. This is what I used on my 69 Barracuda. You install this pipe stub (it's 8-10 inches long) and cut it to the correct length to connect the rest of the exhaust. I've also attached pics showing how I made the 340 driver's side exhaust on my car...the driver's side is the tightest. Thanks,Treblig