67 318 magnum swap

68coupe said

Jeg's oil pan - Summit has them also but Jeg's had free shipping:http://www.jegs.com/i/JEGS+Performance+Products/555/50272/10002/-1Start researching your electrical and fuel systems. I used the original uncut wiring harness for electrical plus the Dodge PDC (fuse panel). While I was at it, I wired the lights, fuel pump relay, alternator, ignition switch, etc through the PDC.Player1up and AAADave helped me through the fuel system. Mine is not running yet, but I'm close!

Click to expand...

Im going to use a stock tank and put an intank pump in, utilizing the non return set up. As far as wiring I also plan to leave as much factory as possible. (more reliable) I haven't decided on whether or not to get into the vehicle wiring (lights, ect) or just leave them on their own separate system. Im going to be using the stock dash cluster from the Dakota so all gauges will be plug and play. (also cuts cost) I do want to fuse and relay everything.

Thank you for the link. I wasn't sure if the 318/360 motors took the same pan.