360 timing

ok its raining here. I did run out and at 3500rpm its at 45 degrees. The 25 was at idle. I did not disconnect the vac advance. I am going to get the compression numbers and the timing numbers that you asked for, but it will be this weekend at the earliest. I do not have a camcard but the paperwork says ultradyne 252/261 @ .500 560/570 lift, standard lash at .026. The heads are not aluminum. A previous owner that i spoke with had the transmission rebuilt and said that they removed the high stall converter and replaced it with stock. I take it that he was unhappy that the car wouldnt spin tires unless revved really high. I dont know the rear diff gearing. And it has 14 inch tires