Help!! Won't Crank

Here's the thing that happens when you reverse a battery:

NO solid state electronics "like" this and if you had the key "on" when this happened, there are several things in the car that are not fused

If you have some form of electronic ignition, that's not fused

The voltage regulator is not fused

The diodes in the alternator don't like this at all

So the question becomes "what was powered" at the time and "did the link" blow quickly enough?

This is always a gamble.

Another good read is this article: Even if you don't perform this "mod" it goes through the main power distro in the car

http://www.madelectrical.com/electricaltech/amp-gauges.shtml

Download the shop manual. Read section 8. There are diagrams in the rear, and the bulkhead connector will be outlined there as well.

Post back to this thread when you "get into" it.