340/mag360 exhaust manifolds

If i can find a piece of short radius pipe like yours, i may be able to make it work. I am indeed running p/s, but the torsion bar seems to be the most in the way. I'll have the engine / trans and k member out soon and i'll be able to get at it easier. This thing turns to the driver side and forward just a little. My original turns straight back just a little. Will let you know how it works out.

Tom


There are a few companies that sell the super tight radius U and J bends. you only have to buy one. Vibrant sells a 3.5" radius 2 1/4" pipe and Hooker also sells the same radius even cheaper than Vibrant. I've even seen 2 1/2" pipe formed into a donut that look to have a 2 1/2" radius for only $23, you can see it here:

[ame="http://www.ebay.com/itm/Mandrel-Bend-Donut-Exhaust-Intake-Mild-Steel-Turbo-Pipe-2-5-2-5in-Weld-System-/301333827084?pt=Motors_Car_Truck_Parts_Accessories&hash=item4628e54e0c&vxp=mtr"]Mandrel Bend Donut Exhaust Intake Mild Steel Turbo Pipe 2 5" 2 5in Weld System | eBay[/ame]


I used a 3 1/2" radius piece of pipe.

treblig