Went out after supper to work on trunk floor and veered off in a different direction. lol
Decided that these inner deck supports have to come out to get at the spotwelds for the frame rails, so, out it came. I will do the other side when I do the opposite frame rail. Going to move one at a time so there isn't any movement. View attachment WP_20141110_032.jpg View attachment WP_20141110_033.jpg
Then I looked at the rust around the rear window opening and decided I would fix the bad area on the driver side. View attachment WP_20141110_040.jpg
Cleaned it up some with a wire wheel and the grinder. Guess what? More holes. Didn't plan on repairing the lower portion, but that needed new metal also. Took what was left of the upper piece off first. View attachment WP_20141110_041.jpg
Then cut out the lower piece. Pretty rusty on the backside. Probably helped along by the mouse house I found in there. :protest: View attachment WP_20141110_039.jpg
Formed a new piece for the lower portion. Trimmed and fitted it to butt weld in. I will do that in the morning. View attachment WP_20141110_038.jpg View attachment WP_20141110_042.jpg
Off to bed now. 5:30 comes quickly.:protest: