Finished up the drip rail shave on left windshield post. Welded and ground down for duraglass. View attachment WP_20141112_009.jpg
Looked at the rear window trim area and decided to fill in this recessed area for the trim chrome. (that's not going back on.) View attachment WP_20141112_012.jpg
Ground everything down to bare metal and then formed a patch to fill the recess. View attachment WP_20141112_014.jpg View attachment WP_20141112_017.jpg
Finished up the welding and ground down ready for duraglass. View attachment WP_20141112_019.jpg
Flipped car over and ground a little and chipped off some undercoating to find the spot welds for the frame rail. View attachment WP_20141112_021.jpg
I think the spring braces that weld to the inner rocker I can just cut at the flanges and leave them attached to the rocker for easy relocation. Then when they get extended after rail relocation I'll know exactly where they locate. View attachment WP_20141112_022.jpg
Remember, the frame rail is going to be moved aprox 5 inches inboard.