1967 Cuda FB project

Took some "obsolete" exhaust pipe and made some braces in the trunk area to keep the body from moving while the frame rail is out.
View attachment WP_20141115_004.jpg
Then I cut the spot welds holding the bracket for the emergency brake cables and the bracket for the brake line.
View attachment WP_20141115_002.jpg
Here's the two brackets removed.
View attachment WP_20141115_001.jpg
I had all the spot welds cut loose for the drivers side frame rail but I couldn't get at the brackets assy welded to the rear of the car because of the rear roll pan. I decided to cut the frame rail right behind one of the brackets. Then with the frame rail and bracket out of the way I can get at the remaining spot welds without removing the rear roll pan. (I just have to weld the two pieces of frame back together before I weld back into car.)
This pic shows where I cut the frame rail.
View attachment WP_20141115_003.jpg