for the oil. what does your breather look like. after a hard pull on my car my valve cover is soaked from my breather. im thinking about running a hose to the front of my turbo.
My breather is really clean - not perfect and a little tiny bit oily, but it's not dripping oil. Nothing above the block is weeping at all (which is good I think - minimal blowby) but the oil pan developed a small hole in the RTV that was previously between it and the block just under the exhaust manifold outlet, and it gets a streak of oil, which I think might be what's blowing up onto the firewall also, not sure. I have not dropped the oil pan since owning the car and it looks like sealant was being used to stop a leaky gasket. I'll drop it eventually and fix, but at this point, whatever's coming out is barely noticable, just on the oil pan paint.