demon rehash

I have a Duster that I just ran two weeks ago in a tnt after sitting 2 years. Its a 340 13.1 comp so Im told small crane solid 560 lift mild ported X heads strip dominator tti 1 3/4 headers 727 5200 stall 4.88 gears 29.5 x12 slicks. It has a factory bench that I just put back in 6 point roll bar subframe conn. No back seat metal rear bulkhead battery in trunk 8 gal fuel cell. It has full Caltracs that aren't tuned yet, Wilwood front discs tube upper control arms. Weighed it at the track 2910 without me in it. Im 240. I got it down to 11.39 at 116 mph 1.60 60 ft. It traps at 6800 I have a little bit of tunning to do to the carb it might be a little small around 800 cfm. I need to play with shock adjustment in rear as I had it set on 1. way to soft. I think it will run 11.20s once I get the carb and shocks sorted. Its a foot brake car I leave off idle it picks the front off the ground runs straight and brakes great. Fun to drive. I had some W2s I was planning on installing but I don't think so now. I don't know where you will run it but Im at sea level. Tune it it takes time but you should be in the 10s with tuning. I would also like to run aluminum rods.