Crank Hole Finish Size For Pilot Bushing

cosgig said
The crank is drilled plenty deep enough for the bushing! All of my other cranks that have the bushing in them already have almost an inch more depth than the bushing! This crank is drilled as deep as the other cranks!

The snout of the input shaft has not been modified, and with the bushing in the correct place will work as stock!! Geof

Then you can make the snout bushing, the pilot, or the roller.
You already have the pilot.
Turn the pilot bushing OD, add some lead to one OD end, press it in, and ream to size. Needs to have a solid press fit so it doesn't spin on ya.

Bottom of page..................

http://www.symmco.com/newpages/Tolerances.html