1965 Dodge Dart Charger

Now the first quarter glass is in Place. After Reading the shop manual for quite some time I was ready to add the glass.

The bolt with the rubber hose and the washer was in place so attention was on not damage the glass or cracking the paint. I covered the sides with fabrics and then I was able to let down the glass and putting the bolts through the glass and then add the washer on the backside of the glass before mounting it to the bracket.

Then time to adjust the front track so the glass can go up/down without getting to close to the body. Remember that the glass should have the cat wiskers on eachside too!

Now I just need tofind the belt for the rear track and one side is done!