T-bars vs Stored energy

tony-

I will plot that out, when I get it back into the shop


we set the dana at 3* down

the front spring eye is up 1" from
from the factory (front)spring eye

because we put the sliders on
( the slider is 2" less in height than a rear hanger)
spring is still 6" difference, front to rear, with rear being higher



this was in jan 2014
hop
tried with shocks in front of the axle

still hop-, so we took these springs off



and put the higher rate spring in





crackedback- after putting the heaver springs in

when i then added the flat leaf, at the bottom, i left the clamps off

tracks were closed around here

but in nov 22, found a track open

went -still hop

backed the timing off, to kill the hit
just to get it off the line

was no fun,
so loaded it up



In the video, that's the Chevy hitting the rev limiter in the water box...

[ame]http://vid267.photobucket.com/albums/ii313/draginmopars/white%20dart%202/hght.mp4[/ame]



as of now, waiting on the shocks

When they get here

going to take everything back out
after plotting what is there.