**73 Scamp Mini Pro-Street Engine Swap**

I got the wheel spacers on & wire tied the hats to the rotors along with the caliper bolts as well since they had wire holes in them. Wheels clear everything now and I will not need to get the street tires re balanced. The weights clear.

Rear brakes are all plumbed with the proportion valve and Line Loc.

I lowered the rear of the car another 3/4 " and dropped the torsion bars to match. It looks good like that so I will try it and see how it does. The rear can go down another 2" Easily without worrying about rubbing anything.

The trunk paint is still drying so I did nothing with it.

Items left.....

1) Install upper control arms
2) Install New rotors, Wilwood Calipers, pads & Brake drop lines in front
3) Mask and paint bars in trunk
4) Cut in trunk mat and install battery, fuel cell and NOS bottle.... Trunk will be done
5) Install MSD RPM Switch for second fuel pump
6) Rear Firewall
7) Re Install Interior.
8) Test and Tune

View attachment IMG_7185.jpg

View attachment IMG_7187.jpg