426ci Max Wedge Engine

I originally received this engine on trade for some racing parts I had. The motor has been out of the car in heated storage for 2 years. I was told the engine should be fine with the carbs rebuilt and distributor adjusted. The car it came out of was a high dollar 1964 lightweight car and the owner reunited the car with it's original motor, so this one came out. I have had the valve covers off only and everything looks really clean, also confirmed cylinder head numbers and factory adjustable rocker arms. When I took the motor out of the crate I noticed the corner on the drivers side exhaust manifold flange is broken off and had been used with a bolt and a couple of washers with no issue. Also, the bolt hole boss under where the starter would mount is broken, again used with no issue. I am discounting the motor to $8500 obo from $10K because of the 2 issues. Thanks! Woodstock, IL 60098

- AAQA block standard bore 8/24/62 casting #2406730-1 RL, 2400 miles on short block with all stock parts.

- 11:1 compression

- original untouched Stage III 518 heads #2406518

- 3447 carbs

- has a street Hemi oil pan

- cross ram 2402726

- correct exhaust manifolds with correct numbers #2402336 & #2402334

- has a NOS Max Wedge distributor #2444272

- complete carb linkage and carb fuel lines.

- correct water pump #2205862, fan and pulleys.

- Hemi fuel pump carter #4024S

- original style plug wires

- engine will need coil and alternator (bracket is included) to run