Purple Vs Lunati Voodoo

Funny to see this brought back I'm still running that same '60401' voodoo cam now in my 10.5:1 360 five years later. Behaves very differently with the big jump in cubes and compression from the tired 318, massive torque 1800-5000ish RPM then I can feel it start to nose over a tad. No wear issues either being a "steep" cam I have maybe 10k hard miles on it including about 8 passes down the strip, I run either Valvoline VR1 or Mobil 1 high-performance oil they both contain zinc and are intended for flat tappet cams.

I've been looking at bigger cams to open up the top end HP a bit and I would get the 60403 but it has too much lift for my 1.6 rockers and stock Magnums, got my eye on a Crower with similar numbers but a bit less lift