Left for Dead 68 Barracuda Buildup

I am not generally one to purchase offshore tools often. This one came to me
slightly used by a guy that owed me. I figured OK better than nothing which Is what
I had planed on getting from him anyway.
Within the first few minutes of use you begin to see some of the shortcomings of this
contraption. The fill port to the pot is about the size of a half dollar.
To remedy this I cut the top off the tank and welded a cut down 4" pipe nipple to the tank.
Got a cap and welded a bar across it to get a grip on it without tools. I then modified a steel funnel with some PVC fittings to adapt it onto the new threads. Put a screen inside funnel to
keep the larger junk out of the pot so it won't plug it up. I now can fill the thing easily enough.
The next problem that is noticed is when you have the pot full of grit the wheels and legs cannot
support the weight. Especially when you have to give it a good shake now and again to keep
the grit flowing through it. So I rebuilt this and it is now good and stable.