833+magnum?

I machined the balancer and made a bracket on my 360 Magnum to allow me to use the transmission I wanted. There are 8 holes/grooves/windows 2 degrees wide that need to be made. The groove for TDC is right at 2 degrees wide on a 5.9 Magnum. The exact position for the sensor in relation to TDC escapes me right now, but the measurement involved a degree wheel and powering the sensor and monitoring the switch point with a voltmeter. For a crank sensor I used a generic hall effect sensor from Moser Electronics. The brand name was Cherry Electronics. It had a threaded barrel which used a jam nut on top and bottom to lock it in place.