Project Plain Jane

Thanks very much gents! I checked out the sheet metal link. There is an immediate savings based on cost alone for the 1/4 panel skin. The patches they have don't cover enough area. And no wheel houses,so it's still Summit for those.

I do have a concern with those 1/4 skins,as they appear wavy in the pictures. Im thinking thier quite thin? How were your Duster skins quality Dusterdaddy?

I have worked with the Sherman 1/4 panels in the past on an off brand X. They were fine.

This isn't going to be a high dollar show car,but I still would go for the middle of the road Sherman part based on experience vs a very thin panel.

I know AMD is king,but it's also expensive. BUT;as far as the wheel houses I don't think there is another option. AMD may be the only supplier.

Good tip on going to Rockauto.com for the 1/4 panel skin,as the same Sherman panel there is $178 compared to Summits $256! Unfortunately no wheel houses at Rockauto.

So shopping around might save me almost $80 on the skin.There is a note on the sherman skin that the marker light hole might need to be altered. I'll get around that by not using that portion,as all thats truly needed on the drivers side is the wheel arch area leading and aft,and lower 1/4 aft. Shopping around for the wheel houses got me nothing,lol. AMD KNOWS they have a corner on the market there...