**73 Scamp Mini Pro-Street Engine Swap**

Ran into a couple problems.... 1st one is the brakes got blead but the pedal won't hold pressure. Rear was drum now 4 wheel disc. I found out that the stock distribution block wont work and it bleeds off the pressure once you let off the pedal. Fluid goes back to the master. The fix is to either gut the stock block of its built in residual valving or just get rid of it. I'll figure that out tomorrow.

Second issue is the steering box is loose, I need to inspect it further... Looks like the K Frame is flexing..... I hope it's not cracked....I'll weld it up and gusset it to make it stronger... The Pitman arm and tie rod ends will also be replaced. Lower ball joints are all good. Alignment is on hold until i fix these issues. Couple days is all it should take.