1970 Swinger 340 Hemi Orange 4 speed
Thanks!
Thanks for the compliment! Haha this is going to be one long thread by the time this car is done!
Thanks! The drivers side of the firewall is in good shape. I will not be sectioning it. I had to cut the lip on the drivers side and roll it up so the frame rail to inner rocker splash shield would clear while sliding the clip into place, so all i have to do is weld up that cut. The passenger side will be sectioned with a piece from the california cowl/firewall section i have leftover (the upper cowl will be used as well) the passenger side lower firewall rusted from a leaky heater core. This weekend i will start on the firewall and butt weld in the new piece.
My Rotors came in today, so i am just waiting on the pads. These rotors seem to be discontinued thru Rockauto so i got a set just in case they completely stop making the premium rotors.
Thanks!
Thanks for the compliment! Haha this is going to be one long thread by the time this car is done!
Thanks! The drivers side of the firewall is in good shape. I will not be sectioning it. I had to cut the lip on the drivers side and roll it up so the frame rail to inner rocker splash shield would clear while sliding the clip into place, so all i have to do is weld up that cut. The passenger side will be sectioned with a piece from the california cowl/firewall section i have leftover (the upper cowl will be used as well) the passenger side lower firewall rusted from a leaky heater core. This weekend i will start on the firewall and butt weld in the new piece.
My Rotors came in today, so i am just waiting on the pads. These rotors seem to be discontinued thru Rockauto so i got a set just in case they completely stop making the premium rotors.
