Too cut or not to cut?

You can run the ET street 28x11x15 Its 27 Inchs tall fits on a standard 8 inch wheel with 4-1/2 back space or seven but you wont get the back space. The tire will hit the lower fender you don't have to cut. add a spacer 3/8 inch in front of the forward spring eye mount. if you have heavy duty springs then clamp them add a pinion snubber add pinion taper wedge to drop the nose of the pinion. Super stock springs would help but if set up you can get it to work. I ran exact combo you will need some decent shocks. I would not add sub frame connectors unless you drive it hard and a lot. If the tire rubs on one side and not the other its common as the rear ends werent centered well. You can remove and replace the spring perches once you have the rear end centered. It sound s like a lot but if you plan and take measurements it will work and can be returned to stock.