Stroker Combo Questions

We are chomping at the bit to install our new setup... I just sent the converter back to ATI today to be reworked then we will drop in it.

440 based 505. 30 over, 4.25 crank, 7.10 rod, 11.5:1 CR. We used the same cam and intake/heads from our old 440... 1100 pro systems dom, indy intake, 440-sr's with max wedge ports, .690 lift 287@50 comp solid roller...

Went with Eagle crank and rods with Wiseco pistons. We used our old steel main caps, no girdle, no block filling.

Hopefully get the converter by the end of the month and have it running in early February....

Good luck with yours.