440 Source cut to length pushrods

I have a new set of 440 Source cut to length push rods , below is the write up on the 440 Source site .

I would like 120.00 US funds plus shipping or best offer


Our new AMERICAN MADE cut to fit pushrod sets are exactly what you need if you don't know exactly what your finished pushrod length should be. These 3/8" .060" wall heavy duty pushrods come with the ball end (bottom end) of the pushrods assembeled, however the top (cup) end comes unassembeled, so that you can cut the tubing down to the exact length you need. Maximum length is 9.500" (if they were put together without shortening the length,) and these pushrods can be cut down to any length shorter than that. While we recommend cutting the tubing on a lathe for the straightest possible cut, if you are in a pinch, these can also be cut with a cutoff wheel. The ends can be pressed in with a press, or (in a pinch) tapped in with a mallet if necessary. A great way to ensure you'll be getting the correct length pushrods, without having to mess with multiple orders, custom made parts, etc.