Dare I Post My New Wheel Setup?

72BBSwinger said

I like them, get some negative camber in there and at least 8+ caster and I bet you will have just some slight trimming of the wheelwell mouldings. Im setting at about 26mm with the spacer I have and I needed to air saw a little off the lip at top center because I would get a slight SLIGHT rub on driveway entry.

Click to expand...

The fender to wheel clearance on the +30mm offset wheel was perfect. I had it at full compression and full lock in both directions with zero rub. It fit snuggly in the wheel well. Since this is going to be pushed out a little bit, I'm a touch worried, but we'll see. But I committed to this wheel choice knowing I was probably going to do some modifying of the lip.