More changes on the way. Well I just couldn't resist any more. the old front suspension is out. The new HDK front suspension will be going in. Denny (hemidenny) was kind enough to send me one of his early A body K frame to use as a mock up. So here we go. Taking measurements from the center line of the front K frame mounting hole. I'm was pleased to find the HDK unit will fit with out much fuss using the SRT4 motor set up I have. I have moved the motor as far back in the engine compartment as I can leaving about 1" of clearance to the fire wall. The front of the transmission tunnel will need a little work to clear the bell housing. But not a huge amount of cutting will be needed. A small recess to the oil pan will be all that's needed to clear the rack. The X on the floor is were the shifter will be. Just waiting on the motor plate to be water jetted and I will get this thing mounted in place.