67 cuda FB progress UPDATE

First, I laid the headliner out flat with the side that will be seen facing down and the pockets for the bows facing up. I also oriented the headliner with the back window part closest to me.
This is to be sure you get the bows in the correct pockets.
I next laid each bow out in order next to the place I will slide them into and centering them on the material. It is very important to be sure that you find the center of the headliner and the center of each bow. I marked mine with a sharpie pen and a white paint pen on the bow as well so that I could line up my marks. This will help make certain that the bows are centered.
Now that they are centered, you cut a small slit in the pocket only. one at each end or your bow. I cut mine about an inch short of the length of the bow so that each end can stick out a bit after it is inserted and slid into the pocket. Do this for each bow. Make sure that you keep the bows in the order that they will go when hanging the headliner in your car.
After they have all been slid into place, go to the car and start hanging them one by one starting from the back window first.

View attachment 0211151731.jpg

View attachment 0211151731a.jpg

View attachment 0211151801.jpg

View attachment 0211151801a.jpg